Waste Pump-Out Facility

Waste Pump-Out Facility

 

Bush River Yacht Club received a permit to install a waste pump-out facility.  The pier and pump-out facility was completed and operational in August 2013.


 

 

Pump-Out Instructions Using Sanisailor at BRYC

  1. After securing your boat to pier, open holding tank port
  2. Uncoil pump out hose on pier
  3. Open ball valve on hose and start pump with green button
  4. Move hose to boat and close ball valve
  5. Connect pressure fitting to holding tank port and open ball valve
  6. Liquid from holding tank will start to flow
  7. Watch clear section of the hose to determine when tank is empty
  8. Close ball valve and wait for fitting to drain
  9. Remove pressure fitting from boat with fitting pointed upwards
  10. Open ball valve and dip in river for 5 seconds to clean hose
  11. Close ball valve and push the red button to stop pump
  12. Coil and store hose and close port on boat